WAGO TEchDocs 765-4501/0100-0000 Manual page 21

765-4501/0100-0000
Property
Output current, L1
Output current, L1 with IO-Link operating mode
Output current, L2
Output current, L2 with IO-Link operating mode
Circuit
Self-protection
Voltage drop through high-side path
Maximum capacitive load
Maximum inductive load
Diagnostics (1L+)
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Value
Maximum: 4.0 A per channel per IEC 61131-2
Maximum 1.0 A with conductor size AWG 22/0.34 mm
and cable length of up to 20 m (per IO-Link specifica-
tion)
Maximum 4.0 A with increased conductor cross-sec-
tion or reduced cable length (max. voltage drop of
1.2 V for both feed and return line individually)
Maximum: 4.0 A per channel per IEC 61131-2
Maximum 1.0 A with conductor size AWG 22/0.34 mm
and cable length of up to 20 m (per IO-Link specifica-
tion)
Maximum 4.0 A with increased conductor cross-sec-
tion or reduced cable length (max. voltage drop of
1.2 V for both feed and return line individually)
High-side driver
The 1L+/2L+ output is not resistant to reverse power
feeding.
The input voltage must not exceed the supply voltage.
Overcurrent, overload, overtemperature and overvolt-
age
Less than 200 mV
1000 μF parallel to 24 Ω; 0.1 Hz
470 μF parallel to 12 Ω; 0.1 Hz
220 μF parallel to 6 Ω; 0.1 Hz
1.15 H / 2 A; 0.2 Hz; DC13
Events: overcurrent, overload, overtemperature and
overvoltage
Properties
2
2
21