Table of Contents
Advertisement
765-4501/0100-0000
Provisions
1
This documentation applies to the following product:
Item no.
0765-4501/0100-0000
1.1 Document Portfolio
Note
Observe the applicable documentation!
This product must only be installed and operated according to the instructions of the com-
plete Instructions for use. Knowledge of the complete Instructions for use is required for
proper use.
1. Carefully read the Product Manual.
2. Before commissioning, follow the instructions in section
Document Type
& Product Manual
& Data Sheet
& Instruction leaflet
All documentation is available at:
Besides this documentation, the following supplementary document is available:
& Product Manual WAGO IO-Link Configurator
•
1.2 Intended Use
The product 0765-4501/0100-0000 is used to capture field signals on sensors, actuators
and hubs which have been sent or received by a higher-level controller and output them
via IO-Link.
The product works as a decentralized input/output unit in EtherNet/IP und ETHERNET
TCP/IP networks.
• This product is intended for installation in automation technology systems.
• The product meets the IP67 protection type requirements.
• The product is intended for indoor and outdoor use.
• Operation of the products in Industrial area is permitted.
• Operation of the product in other application areas is only permitted when correspond-
ing approvals and labeling are present.
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Item description, long
8-Port IO-Link Master Class A; EtherNet/IP;
24 V DC; 2.0 A; 8 × M12 connection
Contents
Contains all the product-specific information for a product.
Contains the technical data and approvals / certificates for a product.
Is included with each product. Contains initial information on safe handling of
the product.
ü www.wago.com
Table 1: Scope of Applicability
Item description, short
8 PORT IOL-A FLD EI 24 VDC 2.0 A
8 Safety
[} 12].
Table 2: Complete instructions for use
/<item number>.
Provisions
7
Advertisement
Chapters
Table of Contents
