Service; Resetting To Factory Settings; Updating Firmware - WAGO TEchDocs 765-4501/0100-0000 Manual

8-port io-link master class a; ethernet/ip; 24 v dc; 2.0 a; 8 × m12 connection

Table of Contents

Service

The device can be reset to the factory settings. Use the WAGO I/O Field Webserver for

this purpose.

You can find information on the procedure under Parameterizing the Module via the

WAGO I/O Field Webserver >

[} 102].

The device's firmware can be updated. Use the WAGO I/O Field Webserver for this pur-

pose.

You need the firmware file corresponding to the module type. The name of the firmware

file is always FWUPDATE.zip; you can store it in a folder with the name of the module

(e.g., 0765-4501).

You can find information on performing firmware updates under Parameterizing the Mod-

ule via the WAGO I/O Field Webserver >

126

Product manual | Version: 1.1.0

8PORT IOL-A FLD EI DC 24V 2.0A

8 Resetsetting the Module to the Factory Settings

8 Updating Firmware

765-4501/0100-0000

[} 100].

Table of Contents

Table of Contents