Table 29 Process Data Of The Digital Outputs (Port-Based Assignment); Table 30 Process Data Of The Digital Outputs (Pin-Based Assignment); Table 31 Output Process Data Of Connections 5 And 6) 765-4501 - WAGO TEchDocs 765-4501/0100-0000 Manual

765-4501/0100-0000
Byte Off-
set
3
4
Byte Off-
set
3
4
Output Process Data of Connections 3 and 4
Connections 3 and 4 have no output process data.
Output Process Data of Connections 5 and 6
The following table describes the structure of the output process data of connections 5
and 6.
Byte Off-
set
1
2
3 ... 4
5
6
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Table 29: Process Data of the Digital Outputs (Port-Based Assignment)
Bit Output Process Data
0 0
1 Port X01, pin 2: DO B
... ...
6 0
7 Port X04, pin 2: DO B
0 0
1 Port X05, pin 2: DO B
... ...
6 0
7 Port X08, pin 2: DO B
Table 30: Process Data of the Digital Outputs (Pin-Based Assignment)
Bit Output Process Data
0 0
1 0
... ...
6 0
7 0
0 Port X01, pin 2: DO B
1 Port X02, pin 2: DO B
... ...
6 Port X07, pin 2: DO B
7 Port X08, pin 2: DO B
Byte Output Process Data
Count
1 DO Status
1 Dummy byte
2 DO Data
1 Port X01 functions as IO-Link
master: IO-Link output data re-
lease
1 Port X01 (pin 4) functions as
digital output: output release
Table 31: Output Process Data of Connections 5 and 6) 765-4501
Description
0: DO data invalid. Substitute values are used.
1–255: DO data valid (pin 2).
Reserved, 0
The port and pin assignment of process data depends
on the process data layout setting: pin-based or port-
based. See the following tables.
0: IO-Link port X01 output data invalid.
1–255: IO-Link port X01 output data valid.
0: Port X01 pin 4 output data invalid. Substitute value
is used.
1–255: Port X01 pin 4 output data valid.
Functions
39