Displaying Port Status Information; State; Table 55 Possible Values Of "State" (Port Status Information) - WAGO TEchDocs 765-4501/0100-0000 Manual

Commissioning

10.3.1.3.3 Displaying Port Status Information

The Status tab shows status information for pins 2 and 4 of the selected port.
This tab answers the following questions about the selected port:
• What is the current port status of the port?
• Is the process data valid for input/output?
• Is a product connected to the selected port? If so, what is this product's version ID?
• How high is the data transmission rate between the port and a product connected
there?
• How long is the communication cycle time in the Operate operating mode?
• What is the true input/output data length of the connected product in bytes?
• What is the manufacturer ID or product ID of the product connected to the IO-Link
port?
Proceed as follows to display the status information on a specific port:
1. From the main menu of the Webserver (left), select the menu item which you want to
view information about.
2. Open the Status tab.
ð The Status tab opens. The current port status information appears.

10.3.1.3.4 State

This shows the current port status information of the IO-Link port. The following table con-
tains all possible values for the status of the IO-Link port:
Value
0
1
88 Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Table 55: Possible Values of "State" (Port Status Information)
Port Status
No Device
Disabled
765-4501/0100-0000
Figure 14: Port XX Menu Item, Status Tab
Description
No product is connected to the port,
or there is no communication with
the connected product
The port is inactive