Table 26 Process Data Of The Digital Inputs (Port-Based Assignment) - WAGO TEchDocs 765-4501/0100-0000 Manual

765-4501/0100-0000
Byte Off-
set
35
36
37 ... 40
41
42
43 ... 46
47
48
49 ... 52
The process data of the digital inputs can be transferred on a port basis (default) or pin
basis. The following tables show the port and pin assignment.
Byte Off-
set
3
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Byte Input Process Data
Count
Port X05 (pin 4) functions as
digital output: output data
1 Port X06: IO-Link PQI
1 Dummy byte
4 Port X06 (pin 4) functions as IO-
Link master: IO-Link input data
Port X06 (pin 4) functions as a
digital input: input data
Port X06 (pin 4) functions as
digital output: output data
1 Port X07: IO-Link PQI
1 Dummy byte
4 Port X07 (pin 4) functions as IO-
Link master: IO-Link input data
Port X07 (pin 4) functions as a
digital input: input data
Port X07 (pin 4) functions as
digital output: output data
1 Port X08: IO-Link PQI
1 Dummy byte
4 Port X08 (pin 4) functions as IO-
Link master: IO-Link input data
Port X08 (pin 4) functions as a
digital input: input data
Port X08 (pin 4) functions as
digital output: output data
Bit Input Process Data
0 Port X01, pin 4: DI A or mirrored DO A (depending on configuration)
Description
Byte 31:
Bit 0 = 0: output off. Bit 0 = 1: Input on.
Bits 1 ... 7: always 0.
Byte 32 ... 34: reserved.
8 Process Image
See
Reserved, 0
IO-Link input data of the IO-Link device on port X06.
For a description of the data, see the manual from the
manufacture of the IO-Link device used.
Byte 37:
Bit 0 = 0: input off. Bit 0 = 1: Input on.
Bits 1 ... 7: always 0.
Byte 38 ... 40: reserved.
Byte 37:
Bit 0 = 0: output off. Bit 0 = 1: Input on.
Bits 1 ... 7: always 0.
Byte 38 ... 40: reserved.
8 Process Image
See
Reserved, 0
IO-Link input data of the IO-Link device on port X07.
For a description of the data, see the manual from the
manufacture of the IO-Link device used.
Byte 43:
Bit 0 = 0: input off. Bit 0 = 1: Input on.
Bits 1 ... 7: always 0.
Byte 44 ... 46: reserved.
Byte 43:
Bit 0 = 0: output off. Bit 0 = 1: Input on.
Bits 1 ... 7: always 0.
Byte 44 ... 46: reserved.
8 Process Image
See
Reserved, 0
IO-Link input data of the IO-Link device on port X08.
For a description of the data, see the manual from the
manufacture of the IO-Link device used.
Byte 49:
Bit 0 = 0: input off. Bit 0 = 1: Input on.
Bits 1 ... 7: always 0.
Byte 50 ... 52: reserved.
Byte 49:
Bit 0 = 0: output off. Bit 0 = 1: Input on.
Bits 1 ... 7: always 0.
Byte 50 ... 52: reserved.
Table 26: Process Data of the Digital Inputs (Port-Based Assignment)
Functions
[} 47].
[} 47].
[} 47].
35