Configuring A Communication Driver For A Usb Link; Figure 43: Communication Parameters, Ip Address - WAGO 750-880 Quickstart Reference

WAGO-I/O-SYSTEM 750
750-880, -881, -882 ETHERNET Programmable Fieldbus
8. Click [OK] to confirm your entries.

Figure 43: Communication Parameters, IP address

3.3.6.2

Configuring a Communication Driver for a USB Link

1. Connect the USB cable (750-923) to a USB port of your PC.
2. Under Windows, you can check which COM port of your PC has been
assigned to the USB cable at:
Start > Settings > Control panel > System.
The "System Properties" dialog appears.
3. Here, select the tab Hardware and click the button [Device manager] to
open the dialog window for the device manager.
Quickstart Reference
Version 1.0.0
Quickstart Description 49