Using A Handset, Headset, And Speakerphone - Cisco 7920 Series User Manual

Using a Handset, Headset, and Speakerphone

You can use your phone as a mobile handset, a speakerphone, or with a headset (wired or Bluetooth
wireless).
If you want to...
Use the handset
Use a wired headset
Use a Bluetooth wireless
headset
Use the speaker mode
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
Then...
Press ; to hang up, press
Lift the headset port cover

the headset port. The
Place and answer calls as usual.
If you use AutoAnswer, see
exceptions.
You can use the headset with all the controls on your phone,
including
The headset audio remains active when the headset is connected to
the phone.
1. Enable the Bluetooth setting on your phone.
2. Scan for a list of Bluetooth devices.
3. Select and pair the Bluetooth headset with the phone.
For more information, see
page 70.
Press and hold
Note You can activate the speakerphone before making a call or
during a call. The speaker mode remains active for future calls
until toggled off.
Note You can activate the speakerphone (on the phone) even when the
phone is docked in the desktop charger and connected to a wired
headset.
Using a Handset, Headset, and Speakerphone
and plug the headset connector into
icon appears on the phone status line.
Using AutoAnswer, page 73
and .
Using Bluetooth Wireless Headsets,
until the icon appears.
.
for