12. RS-232 Operation
12.4.8 OSD Hotkey
The OSD Hotkey command allows you to change the hotkey used to invoke the OSD. The default hotkey is [Scroll][Scroll].
Use the Formula → to set Parameters → to create a Command.
Formula
Command + Control + [Enter]
Parameters
Command
osdkey
Control
scroll
ctrl
Enter
Enter
Hotkey Switching Commands
The available formulas for OSD Hotkey commands are as follows:
1
Command + Control + [Enter]
For example, to change the OSD hotkey invoke key to [Scroll] [Scroll], type the following:
osdkey scroll [Enter]
2
Command + Control + [Enter]
For example, to change the OSD hotkey invoke key to [Ctrl] [Ctrl], type the following:
osdkey ctrl [Enter]
12.4.9 USB Reset
The USB Reset command allows you to reset the USB connection. The default USB reset setting is off.
Use the Formula → to set Parameters → to create a Command.
Formula
Command + Control + [Enter]
Parameters
Command
usbreset
Control
on
Enter
Enter
Description
OSD Hotkey command
Description
Change OSD hotkey invoke key to: [Scroll] [Scroll] (Default)
Change OSD hotkey invoke key to: [Ctrl] [Ctrl]
Description
Enter and send out command
Description
USB Reset command
Description
Enable USB reset connection
Description
Enter and send out command
51