Usb Charging; Usb On-The-Go (Otg) - Tripp Lite U280-004-OTG Quick Start Manual

USB Charging

To charge your USB devices, simply connect the included power cord between the
U280-004-OTG and a power source, turn the unit on via the power switch, and plug
your devices into the available ports. There are two 5V, 2A charging ports for tablets
and other high power devices and two 5V, 1A charging ports for all other devices.

USB On-the-Go (OTG)

The U280-004-OTG allows you to connect up to four USB devices to your OTG-
compatible smartphone or tablet. Connect your OTG-compatible smartphone or tablet
to the OTG port on the hub using the included Micro USB to USB OTG cable or a
specific OTG cable required by your personal electronic device. A USB device (flash
drive, mouse, keyboard, etc.) can then be connected to any of the four ports on the
other side of the hub.
Note: The USB OTG port does not provide simultaneous power and OTG functionality; the USB OTG port can
perform only one function at a time.
OTG-compatible
tablet or
smartphone
14-07-240-93331D.indb 3
3
USB Device
(flash drive,
mouse,
keyboard, etc.)
8/11/2014 5:39:13 PM