Weekly Maintenance/Service (After Approx. 40 Hours Of Operation); Yearly Maintenance/Service (After Approx. 2000 Hours Of Operation) - Weber Geset 141 Original User Manual

Chapter 9 Maintenance and Service

Weekly maintenance/service (After approx. 40 hours of operation)

Requirements
¥
Labeling station is disconnected from power
Required equipment

Lint-free cloth (*21800978)

Label remover (*21800771)

Compressed air spray (*21800768)

Soft brush (round or flat, appr. 100 mm)
Instruction
Please arrange the weekly maintenance/service as follows.
Step
1
2
3

Yearly maintenance/service (After approx. 2000 hours of operation)

Requirements
¥
Labeling station is disconnected from power
Instruction
Please arrange the yearly maintenance/service as follows.
Step
1
2
3
4
5
Version: 30.01.15
* Product recommendation! Can be ordered at the Bluhm Weber Group by 8-digit article number
Procedure
Do not use aggressive detergents or scrubbing agents or hard or sharp-
edged objects.
Clean all sensors (product sensor, low label sensor and label gap sensor)
carefully with a soft brush and compressed air spray.
Check lines, tubes, screw connections, valves, cylinders and motors for
leakage and/or fixed seat.
Possible repairs have to be arranged immediately and professionally.
Remove possible dust deposits from the labeling station.
Procedure
Examine label liner rewinder and the brake belt for excessive wear.
Check all timing belts for wear and correct tension. Exchange all parts
that are necessary for a correct function.
Check all drive belts, deflection rollers, pusher rollers for wear and
bearing clearance. Replace if worn
Examine all screw connections for fixed seat.
Examine all electric connections.
Exchange all parts that are necessary for a correct function.
Page 89 of 97
40020664 Geset 141
GB