Adjustment And Initial Operation; Safety Instructions - Weber Geset 141 Original User Manual

Chapter 7 Adjustment and initial operation
7.

Adjustment and initial operation

Safety instructions

Adjustment and initial operation
The labeling system has to be re-adjusted at initial operation or at a product change. Ar-
range the necessary works in listed sequence. Works that need to be explained in this
chapter.
Possibly there are several test labelings und repetitions of the adjustments necessary until
the desired result is reached.
Requirements
¥
Labeling station is turned off.
¥
One or more sample products.
¥
Labels are loaded correctly.
Instructions
Please put the labeling system Geset 141 into operation as follows.
Step
1
2
3
4
5
6
Version: 30.01.15
Hazards from actively controlled movements.
RISK OF INJURY FROM CRUSHING!
The movements of the labeling system are motor-driven by an
automatic controller in automatic operation.
- Maintain a distance from moving parts.
Entanglement hazard by rotating elements.
ENTANGLEMENT HAZARD!
Rotating elements at the labeling machine, backing rewinder, label
feed, *²conveyor belt and *²top conveyor are driven by a motor.
- Do not grip in, at or between the moving parts.
Procedure
Adjust labeler to label roll width (s. from page 46)
Insert label roll in labeler (s. from page 47)
Arrange label calibration (s. from page 48)
Adjust 3-roll system (s. from page 49)
Adjust product stop (s. from page 51)
Adjust parallelism to product (s. from page 52)
Page 45 of 97
40020664 Geset 141
GB