Table of Contents
Advertisement
Chapter 7 Adjustment and initial operation
No.
1
2
3
4
Requirements
¥
Labeling station is turnd off.
¥
One or more sample products.
Instructions
Please adjust the 3-roll system as follows.
Step
1
2
3
4
Version: 30.01.15
Description
KNURLED SCREW FOR HEIGHT ADJUSTMETN OF PUSHER ROLLER
CLAMPING LEVER FOR AXIAL ADJUSTMENT OF PUSHER ROLLER
ADJUSTMENT MANDREL TO TRANSPORT ROLLER
FIXING PLATE TO LABELER
Procedure
Put a sample product in the 3-roll system.
Position the transport roller by mandrel adjustment (Pos. 3, Fig. 7-5), to the
required criteria (s. section above).
Loosen the knurled screw and the clamping lever of the pusher roller (Pos 1
and 2, Fig. 7-5).
Position the pusher roller axial to product's center and lock the pusher roller.
Page 50 of 97
40020664 Geset 141
Fig. 7-5: Adjustment of 3-roll system
GB
Advertisement
Table of Contents
