Table of Contents
Advertisement
Chapter 4 Description of the labeling station
4.
Description of the labeling station
Function and area of application of the labeling station
Area of application
This labeling station is a manual working station and is used to label round products au-
tomatically. This labeling station forms a hand-work place and is used to label round pro-
ducts automatically.
Depending on kind and dimension of the product, different label sizes are used.
Optional a front side- or a backside label (same length) can be applied in a certain dis-
tance to each other onto the product.
Construction and scope of the labeling station
The machine consists of a base plate, a labeler , a 3-roll system and foot switch. Further-
more the labeling station provides a mechanical mandrel adjustment for adaption to the
different product dimensions. Segmented pusher rollers enable the processing of products
with projecting edges.
Functional sequence and handling
The labeling station is loaded with the product-specific labels and aligned to the product.
The products are placed manually on the roll system and fixed by the upper pusher roller.
The products are fixed in longitudinal direction by an adjustable stop.The labeling cycle is
started by pushing the foot switch.
The label roll is unwound by a motor-powered unit (friction rollers) and wrapped around by
a peeler plate . Thus the labels peel off from liner and are applied laterally in the 3-roll sys-
tem and are pushed onto the skin surface of the product by to rotating rolls. The remaining
backing paper is rewound by a motor.
The product can be removed after labeling.
Version: 30.01.15
Page 23 of 97
40020664 Geset 141
GB
Advertisement
Table of Contents
