Table of Contents
Advertisement
Chapter 1 General information
Technical Term
Tamp Pad
Tamp-Blow
Tamp Movement Time
Tamp-On
Trigger-Signal
Unwinder
VAC
Vacuum Generator (Ven-
turi)
Variable Stroke Sensor
VDC
Wipe-On
Version: 30.01.15
Explanation
Drilled plate of the Tamp on which the peeled off label is
transferred.
Contact free application mode where the Tamp takes the
printed label by vacuum, feeds it to the product and blows it
on the product.
Duration of the Tamp movement (extension and retraction) at
labeling cycle.
Application mode where the Tamp takes on the label by a
vacuum, feeding it and pressing it onto the product.
Signal of a sensor or a PLC, activating the application cycle.
Roll or paper holders for rewinding or unwinding the print
medium (normally for 3 inch cardboard cores). The unwinder
enables a smooth-running unwinding without shock of the
label roll and is controlled by a roller brake (see also dancer
arm). Rewinder and unwinder can also be powered by mo-
tors.
Volts AC (Alternating Current). Also designated as ~
Unit using air pressure for creating a vacuum.
A proximity sensor mounted on the Tamp for identifying the
product. On identifying the product the label is either blown
on or peeled off.
Volts DC (Direct Current).
Labeling procedure, where the label is peeled off at a peeler
plate and applied directly to the product. Label feed and
speed product must be identical.
Page 11 of 97
40020664 Geset 141
GB
Advertisement
Table of Contents
