Weber Geset 141 Original User Manual page 57

Chapter 8 Operation
No. Description
6
7 LED Stopp
8
3+5
Version: 30.01.15
Specification
Entanglement hazard! Via [Jog] function an applying cy-
cle is performed. Maintain a distance from moving parts.
The [Enter] key has 3 functions:



If the red LED above the [Stop]-button lights, the "la-
beler's standby status" is interrupted.
The [Stop]-button is used to terminate the labeling opera-
tion. After pushing the button, the labeler changes to
standby mode.
Pushing simultaneously pushing of the [] + [] –buttons
in function mode is used to calibrate the labeler. Three
+
label-application procedures are arranged, thus the label
position is aligned to peeler bar.
Page 57 of 97
JOG-function: during labeling operation the Al-
pha Compact can be triggered by this key.
In combination with further keys for calling up
menus.
In the menus, the [Enter] key serves for changing
a parameter or to confirm inputs
40020664 Geset 141
GB