Transmit Parameters (Transmit Parameters); Receive Parameters (Receive Parameters) - Weber Geset 141 Original User Manual

Chapter 8 Operation

TRANSMIT PARAMETERS (TRANSMIT PARAMETERS)

This function allows the Alpha Compact to send its configuration parameters completely to
an external PC linked to the USB port.
By pushing the [Enter] button, the data will be transmitted to USB port.
To clone the configuration of a master unit, the output may be stored as a text file and re-
transmitted to other Alpha Compact machines. The text files can be edited on a PC and
retransmitted to the labeler and thus an external service programming is possible.
PROGRAMMING
TRANSMIT PARAM.

Press either [] or [] key* to move to the next parameter.

Press [Enter] to transmit the configuration parameters.

Press either [] and [] simultaneously to exit this submenu.

To exit PROGRAMMING press the [Start] or [Stop] key.

RECEIVE PARAMETERS (RECEIVE PARAMETERS)

This function sets the machine in a waiting condition to receive configuration parameters
from an external PC linked to the USB port.
The function is activated by pushing the [Enter] button. A 5-digit password has to be en-
tered. The receiving mode is terminated automatically by transmission of the last data file.
It is also possible to terminate the receiving mode by pushing the [Stop]-button.
PROGRAMMING
RECEIVE PARAM.

Press either [] or [] key* to move to the next parameter.

Press [Enter] to receive the configuration parameters (if password is requested,
see page 84). [Stop] interrupts receiving mode

Press either [] and [] simultaneously to exit this submenu.

To exit PROGRAMMING press the [Start] or [Stop] key.
Version: 30.01.15
Improper data received through this function may lock-up
the machine or cause unpredictable behavior!
Page 85 of 97
40020664 Geset 141
GB