Weber Geset 141 Original User Manual page 37

Chapter 6 Installation and initial startup
Information on balancing of label sensor to label
No. Description
Display
1
2
3
The sensor calibration can be arranged in automatic mode resp. manually in Teach
mode.
Requirements

Label web is inserted

No transportation of products

Labeling system is ready for operation.
Instruction
How to teach the ultra sonic sensor by automatic mode.
Step
1
2
3
4
Version: 30.01.15
Specification
Display of information
The confirmation button has 2 functions:
 Call up of menus.
 Confirm inputs.
The buttons [] / [] have 2 functions:
 Navigation in menus
 Change of parameter values ([] = increases/ [] = re-
duces).
Procedure
Push 2x the button []. Firstly the main menu is displayed, then the automa-
tic mode.
Push again the button [] to start automatic balancing.
Guide in the following 2-4 seconds the label web with at least 2 labels
through the fork light barrier.
After successful balancing, the display shows the symbol [
Push the button [] and stop the balancing by pushing the button [].
Page 37 of 97
40020664 Geset 141
Fig. 6-5 Balance label sensor USGT

].
GB