102 Label Position (Lbl. Posit); 103 Label Speed (Speed) - Weber Geset 141 Original User Manual

Chapter 8 Operation

102 LABEL POSITION (LBL. POSIT)

Herewith the label position to the peeler bar is adjusted manually, i.e. the label stops flush
with the peeler bar. The calibration function determines this value automatically (see p.
48).
CONFIGURATION
LABEL POSITION

Press [Enter] to edit the configuration parameter.

Press either [] or [] to increase or reduce the value.

Press [Enter] to confirm the entry.

Press [Start] or [Stop] to exit the parameter setting.

103 LABEL SPEED (SPEED)

If the speed is not regulated automatically, a fix value for the feed speed of the labels can
here be adjusted. For optimum results, label and product speed have to be almost equal-
ly.
The adjustment value „0" corresponds to a speed of 0,053 m/min. The highest value cor-
responds to 69,9 m/min. Thus it is not guaranteed that the label speed is actually reached.
As motor startup and braking reduce the effective speed. This has a considerable effect
particularly at short labels (Details s. page 64). It can be balanced by an increase of the
label feed speed normally.
CONFIGURATION
SPEED

Press [Enter] to edit the configuration parameter.

Press either [] or [] to increase or reduce the value.

Press [Enter] to confirm the entry.

Press [Start] or [Stop] to exit the parameter setting.
Version: 30.01.15
CM
M/MIN:
Page 67 of 97
102
11,8
103
0.50
40020664 Geset 141
GB