Chapter 8 Operation
8.
Operation
Safety instructions
Turn on and off labeling machine
Fig. 8-1: Main switch
Start labeling cycle
Fig. 8-2: Foot switch
Version: 30.01.15
Hazard from actively controlled movements.
CRUSHING HAZARD!
Movements of the labeling station are powered automatically by
the controller in automatic operation.
- Maintain a distance from moving parts.
Entanglement hazard by rotating elements.
ENTANGLEMENT HAZARD!
Rotating elements at the labeling machine, backing rewinder, la-
bel feed are driven by a motor.
- Do not grip in, at or between the moving parts.
For operation, the power switchs of labeler and labeling station
have to be turned on.
Turn on the power supplies in position „I". Labeler and labeling
station are turned off in position "0".
About the foot switches a labeling cycle is started. The start of
the 3-roll system, labeling and stopping and the release of the
product belong to the labeling cycle.
Page 53 of 97
40020664 Geset 141
GB