Functions Menu; Label Counter - Weber Geset 141 Original User Manual

Chapter 8 Operation

Functions menu

The functions menu is reached by pressing the [] und [Enter] key simultaneously, as-
suming the labeler is in emergency stop/standby condition (see above). This menu con-
tains some basic settings of the labeler with following sub menus:
FUNCTIONS-MENU

LABEL COUNTER:

RST LABEL COUNT
LCD-SETTING
 LANGUAGE
 LCD-BRIGHTNESS
 LCD-CONTRAST
EVENT COUNTER
STORE CONFIG.
READ CONFIG.
LABEL COUNTER
This provides the opportunity to set a value in the range of 0 to 9999 for the label counter.
If a value above "0000" is entered, the countdown function is activated. That means in
normal operating conditions the entered value is decremented. The display shows a mi-
nus sign in front, for the remaining application cycles. If "-0000" is reached, the machine
automatically stops the execution of labeling.
FUNCTIONS-MENU
LABEL COUNTER

Press either [] or [] key* to move to the next parameter.

Press the [Enter] key to edit the fore digits resp. press again [Enter] to change to
the last digits.

Then press either [] or [] key to move to the editing parameter values (corre-
sponding cursor is flashing) in order to increase and/or reduce

To confirm your settings, please press [Enter]

To exit parameter settings, press the [Start] or [Stop] key.
Version: 30.01.15
0123
Page 61 of 97
40020664 Geset 141
GB