Table of Contents
Advertisement
Chapter 8 Operation
Program menus
The display of the Geset 141 comprises three menu
modes that can be reached and left by key combina-
tions. Push in stand-by-condition the following buttons
simultaneously to reach the following menu:
For more explanation here an example of a display message:
Current configu-
ration data set
Version: 30.01.15
The PROGRAMMING MODE may only be operated by trained
personnel! Wrong programmings may cause malfunctions!
Fig. 8-4: Buttons below Display
Firmware-Version
of controller
ALPHA.05
C=0 004.3
Label length in
[cm]
Page 58 of 97
[]
+ [Enter] = Functions menu
[Enter] + [] = Configuration mode *
[] + [] = Programming mode *
Label
counter
0884
03.6
50.0
Label position to
label sensor in cm
40020664 Geset 141
* Password protected
Label-Application speed in
[m/min]
Fig. 8-5: Display explanation
GB
Advertisement
Table of Contents
