Chapter 2 Safety regulations
Working places for the operator personnel
The labeling station is an automated system and does not require operation while label-
ing. Inserting the products and replacing consumable material, the operation is only per-
mitted to one person. To insert and remove the products, the 3-roll system is used as op-
erator station. Only one person is permitted to .Replacing the consumable material is only
permitted when the labeling system has stopped operation.
For servicing, repairing and troubleshooting (remove the label from the applicator), etc.,
the labeling system can be operated from all sides.
Waste disposal
This label is in compliance with RoHS 2 EU Directive 2011/65/EG given ob-
servance of the prohibitions on use are and avoidance of pollutants.
Version: 30.01.15
Page 21 of 97
40020664 Geset 141
GB