Reset Label Counter; Lcd-Setting - Weber Geset 141 Original User Manual

Chapter 8 Operation

RESET LABEL COUNTER

The counter reading of the label counter will be reset by this function.
FUNCTIONS-MENU
RESET LABEL COUNTER

Press either [] or [] key* to move to the next parameter

Press [Enter] to reset the counter to "00000".

To exit parameter settings, press the [Start] or [Stop] key.
LCD -SETTING
This sub menu covers the display settings. Not only contrast and brightness can be
changed but also the menu language.
Depending on language package, the following languages are available:
Language package 1 (22800870): English, German, Italian, French, Dutch, Norwegian,
Swedish, Turkish
Language package 2 (22800871): English, Greek, Russian, Czech, Latvian, Polish, Span-
ish, Portuguese
FUNCTIONS-MENU

LCD-SETTING

- LANGUAGE SELECTION >>
- LCD-BRIGHTNESS
- LCD CONTRAST
LCD-SETTING
LANGUAGE SELECTION
LCD-BRIGHTNESS:
LCD-CONTRAST:

Press either [] or [] to reach the next display setting.

Push [Enter] to change the parameter.

At language selection the setting is changed directly with the [Enter] button.

Push the * buttons [] or [] to increase or reduce the edited parameter value
(cursor flashes).

Push [Enter] to store the value.

Push [Start] or [Stop] to leave the parameter settings.
Version: 30.01.15
Selecte the appropriate language.
>> Brightness of background lighting
Value range between 001-040.
>> Contrast setting between 001-100
015
030
Page 62 of 97
40020664 Geset 141
GB