Store Configuration (Config. Store); Load Configuration - Weber Geset 141 Original User Manual

Chapter 8 Operation

STORE CONFIGURATION (CONFIG. STORE)

The Alpha Compact's controller is able to store up to 9 different configurations. This fea-
ture provides the opportunity to the user for a fast product change. Thus all topical set-
tings (also the settings from configuration menu) are stored not only temporally.
FUNCTIONS-MENU
STORE CONFIGURATION

Press either [] or [] key* to move to the next parameter.

Push [Enter] to select "save configuration". A number will flash in the display. This
number is the number of data set in which the configuration should be saved.

Press either [] or [] to select the required data set.

Push [Enter] to save the configuration in the selected data set.

Push [Start] or [Stop] to exit the parameter setting.

LOAD CONFIGURATION

If a configuration is saved, it can be loaded in the controller and then be activated.
FUNCTIONS-MENU
LOAD CONFIGURATION

Press either [] or [] key* to move to the next parameter.

Push [Enter] to load the required data set in the controller again. A number will
flash in the display. This number is the number of the data set.

Press either [] or [] to select the required data set.

Push [Enter] to load the configuration of the selected data set in the controller.

Push [Start] or [Stop] to exit the parameter setting.
Version: 30.01.15
Page 64 of 97
40020664 Geset 141
GB