Table of Contents
Advertisement
Chapter 8 Operation
Operation of the Display
The display consists of a LC display and 5 buttons and 2 status-LEDs. It comprises a
connection cable with a 5-pin M12 industry plug and it is connected at the labeler's side
(s. page 38). The installation position can be freely selected and should be at a well ac-
cessible place near the labeler. The display offers in contrast to the panel extended dis-
play, operation, and service opportunities. Status and error messages are displayed with a
short text message. Trained service personnel can take additional options in operation
with the display.
No.
Description
1
Display
2
LED START
3
4
5
Version: 30.01.15
Specification
Displays the different pieces of information.
If the green LED lights above the [Start]-buttons, the "Labeling
readiness" is signalized.
The [Start]-button is used to start the labeler. The labeling oper-
ation is activated by pushing and resp. error messages are
acknowledged.
The buttons [] / [] possess respectively 3 functions:
In combination with further buttons to call up menus.
For navigation in menus.
To change parameter values ([] = reduces/ [] = in-
creases).
The autorepeat-function of the buttons enables a quick change
of high values when you hold on pushing the certain button.
Page 56 of 97
40020664 Geset 141
Fig. 8-3: Display
GB
Advertisement
Table of Contents
