Table of Contents
Advertisement
Login to Alternate Remote Units
The system administrator can connect to each EXTender 6000 remote unit from the PBXgateway II
through the "Remote Login" command within the Management Interface (MI). This command allows the
system administrator to access all EXTender 6000 units for configuration, troubleshooting, and file
transfers.
Procedure
1. Access the Main Menu
2. Press the ↓ key to select Remote Login and press Enter.
3. A menu will appear displaying the Remotes that are connected and that can be accessed from the
PBXgateway. Select the Remote from the list displayed.
Note: The menu only appears if you run in RVP_IP mode. Otherwise, "Remote Login" just connects to the
corresponding Branch EXTender.
•
The screen will display:
Connecting..........................., and the Welcome Screen appears for the unit at the alternate site.
Note: You may have to enter the Administrator Password if passwords are used.
Note: The live log window will not automatically update. Press F4 to update the log messages.
PBXgateway II System Administrator's Guide
117
Advertisement
Table of Contents
