Parameter Location:
Utilization
Remote>Configuration->Connect->RVP_Direct
Description: This parameter allows the system administrator to oversubscribe
the network link. It is the amount of total required bandwidth to actually reserve
for each phone.
Example: Need 128K of bandwidth but only have 115 K available.
Required bandwidth =
Available bandwidth
A value of "90" would be entered under Utilization.
Dependencies: Remote unit only.
Parameter Location:
Web Server
Configuration->IP
Description: This parameter enables you to configure the PBXgateway II &
Branch Office units via a Web server, as opposed to a Telnet or direct
connection.
PBXgateway II System Administrator's Guide
115 =
90%
128
138