Configuration and Management
Introduction
The configuration, operational, and troubleshooting features of the
PBXgateway II are accessible through the Management Interface (MI).
Accessibility
The MI can be accessed with a PC or terminal connected in one of four
ways:
•
Direct Serial connection to a local PC (see page 58).
•
Direct Serial connection via a dedicated modem port. (see page 60)
•
TCP/IP-based Telnet access (see page 60).
•
Internet access via a web browser. (see page 59)
Capabilities
The MI is a menu system compatible with VT-100 Enhanced Terminal
Interface (ETI) enabling the system administrator:
•
the capability for full configuration of the phone and WAN ports plus IP
configuration.
•
the access for full management capabilities
•
the access to status information on port usage
•
the information necessary to troubleshoot problems
•
the ability to review and monitor log messages (for possible signs of error)
•
the ability to perform complete software upgrades.
Phone Set
The PhoneSet user interface allows limited access (to the MI) including:
Interface
Console port configuration for serial access and IP configuration for Telnet
(Remote
access.
only)
(Refer to the individual remote documentation for more information.)
Compatible
•
Alcatel 4200 & 4400
Voice
•
Avaya™ DEFINITY
Systems
•
Avaya MERLIN MAGIX
•
Ericsson MD110
•
Iwatsu ADIX APS
•
NEC NEAX 2000, 2400 & Electra Elite
•
Nortel Meridian
•
Nortel Norstar
•
Panasonic DBS 576 & 576HD
•
Panasonic TDA100 & 200
•
Toshiba Strata DK
PBXgateway II System Administrator's Guide
®
ECS
®
®
®
and BCM
32