Creating A New Config File - MCK EXTender PBXgateway II System Administrator Manual

(Y)es (N)o (S)pecify different filename
Press (Y) to save changes
Press (N) to not save changes
or Press (S) to specify a different file name.

Creating a New Config File

The PBXgateway II can be used in different applications requiring different
Introduction
parameters. The system administrator may need to set up separate
configuration files to accommodate custom parameters for each application.
Example: The creation of a new Remote config file on the PBXgateway, and
copying that new file to the Remote unit.
The ability to modify any configuration file not in use, allows the system
administrator a method for quickly setting up new units based on existing
configuration parameters.
Procedure Access the Edit Configuration Menu using the following path:
Path: Utilities->File>Edit Configuration
Message reads: Create a new:
Select (R) for Remote file. Press Enter
or
Select (S) for Gateway file. Press Enter
1. Select <new file>. Press Enter.
2. Enter New file name:________, (without extension)
press Enter.
Note: File name must not exceed twelve characters and does not require a file
extension. The MI will automatically assign an extension depending on the unit.
3. Modify the necessary parameters as required.
(Refer to Chapter 4 Basic Configuration for more information)
4. Select Save Action and press Enter to save changes. The following
message appears:
Save changes to Filename _____.rem (Remote) or .swt (Gateway)?
(Y)es (N)o (S)pecify different file name
Press (Y) to save changes.
Press (N) to not save changes.
or Press (S) to specify a different file name.
PBXgateway II System Administrator's Guide 160