Compatible Remote Units; Network Requirements - MCK EXTender PBXgateway II System Administrator Manual

Compatible Remote Units

The PBXgateway II is compatible with many different types of remote units, with each unit having different
network and user requirements. Complete installation and configuration information is provided with each
remote unit in the form of a "Quick Installation Guide" (QIG) or "User's Guide". Please consult the
appropriate document for information not contained in this document.
EXTender 6000 – for Branch Offices.
Provides connectivity for up to 12 remote users from a single branch office location. Each phone is cross-
wired to a port on the unit.
EXTender 4000 – for IP
Provides connectivity for a single user client via an IP network. The single user phone is simply plugged
into the Remote unit "phone" port.
EXTender 3000 – for ISDN
Note: Supported on Meridian and DEFINITY protocols only.
Provides connectivity for a single user client via an ISDN connection. The digital telephone is simply
plugged into the Remote unit "phone" port.
EXTender 1000 – for PSTN
Note: Supported on the DEFINITY protocol only.
Provides connectivity for a single user client via an analog PSTN connection. The digital telephone is
simply plugged into the Remote unit "phone" port.
Mobile EXTender for Cellular and Analog Telephones
Note: Supported on Meridian and DEFINITY protocols only.
Provides connectivity for a single user client via a cellular or analog telephone.

Network Requirements

•
Active network from the Branch Office to the corporate facility over a T1, Fractional T1, ISDN, Frame
Relay, PSTN, or ATM.
•
Installed network device.
•
Digital phone(s) and line cord(s)
PBXgateway II System Administrator's Guide
IMPORTANT:
DO NOT connect the Remote Unit to a PBX/KSU.
52