Remote Module Installation
Pre-Installation Checklist
Before continuing with installing and configuring your Remote Module, please go through the following
checklists.
Remote Module Checklist
Ensure your EXTender 3000 kit includes the following items:
•
One EXTender Remote Module
•
One EXTender 3000 Remote Module Quick Installation Guide
•
12 volt DC unregulated supplied by standard 120 volt adapter (U interface) or a 12 volt DC unregu-
lated, supplied by 220/240v adapters (S/T interface)
•
One ISDN line cord (RJ45 cable)
Ensure your digital telephone is located within 400 feet (120 meters) of the EXtender 3000.
The following services should be installed and tested before proceeding:
•
ISDN line, as described in the ISDN line checklist.
Optional parts to configure the Remote Module, but NOT included with the system:
•
PC or terminal with a terminal emulation package (VT100 compatible).
•
RS232 serial cable. (Male DB9 connector required for the Remote Module connection. The other
connector should match to the PC or terminal.)
Caution: Do not connect a digital port from the PBX to a Remote Module.
EXTender 3000 System Administrator's Guide (Definity)
Remote Module Installation
Page 33