Table of Contents
Advertisement
Parameter Location:
Sync Setup
Configuration->WAN->WAN_1 or WAN_2
Description: Enter data rate of device connected to the WAN port of the
EXTender unit.
Usage: Matches the synchronize data transfer rate of the Gateway and Remote
units connected to the network device (CSU/DSU).
Example: 384,000
Dependencies: Sync rate of the EXTender units must match the CSU/DSU
device.
See Also: See Chapter 4 Setting the Sync Rate
Parameter Location:
SysContact
Configuration->IP->LAN (or AUX_LAN)->SNMP
Description: Used for SNMP. The name, phone number, etc. of the individual
to contact with errors or questions about the EXTender.
Usage: Used for reference purposes.
Example: Ralph Jones
Dependencies: SNMP must be enabled.
See Also: See SNMP Setup on page 90.
Parameter Location:
SysLocation
Configuration->IP->SNMP
Description: Used for SNMP. The location of the EXTender.
Example: Boston, MA
Dependencies: SNMP must be enabled.
See Also: See SNMP Setup on page 90.
Parameter Location:
Telnet
Configuration->IP->LAN (or AUX_LAN)
Description: Enable/Disable Telnet Access
Usage: Enabling this parameter provides Telnet access to the PBXgateway II
through a PC connected to an IP network.
Dependencies: The IP Address must be assigned by the network administrator.
See Also: Chapter 4 IP Address Parameters
PBXgateway II System Administrator's Guide
135
Advertisement
Table of Contents
