Connex Port Parameters - MCK EXTender PBXgateway II System Administrator Manual

ConneX Port Parameters

Parameter Description
Enable This will enable ConneX features on the selected port. Select No, Yes or Default.
Dialback Mode A configurable setting that determines where the PBXgateway II routes your calls.
There are four different Dialback Modes and the level of security varies from one to
another: Roaming, Disabled, Fixed and Fixed/Forced. Refer to Dialback Modes on
page 22 for more information on these operating modes. The System Administrator
the only person who can change the Dialback Mode.
Dialback Number The telephone number that the PBXgateway uses to reach you on your mobile phone.
Incoming calls to your office extension are routed to the dialback number that is
currently set.
Note: Dialback number must include prefix (9+ 1 e. g.) necessary to access outside
line.
Transfer Key Assigns Transfer call function to a specific key mapped on the PBX.
(Meridian Only)
Conference Key Assigns Conference call function to a specific key mapped on the PBX.
(Meridian Only)
Trunk Key This item only needs to be set on a ConneX Trunk port:
ConneX -> Enabled = Trunk
(Norstar Only)
When the EXTender needs to dialback the ConneX user needs to know what key to
press to access a line and dial the user.
Sounds
RCX Phone Enabled, Disabled. This enables detection of the presence of RemoteConneX phones
on the network. Which will determine if you will have RCX or MCX features available.
Detection
RCX Phone Enabling this feature will cause a red light on your RCX enabled phone to light,
indicating that you have a new message stored in the corporate voicemail box. The
Lamp
lamp will remain on until the voicemail has been retrieved.
Ring Count Properly setting this ring count will ensure calls are routed to your Corporate Voice
Mail instead of your mobile service provider's voicemail. Ring count will dictate the
number of audible rings the GW will send to the remote phone, via dialback before
going to your corporate voice mail.
Set this count at least one ring higher then your service provider's voicemail ring
count. In most cases a Telco will set their voicemail ring count to 4 rings. We suggest
setting this value to at least 5 rings to ensure your Corporate Voicemail will receive
this unanswered call.
Email
Note: SMTP Server must be configured. Please see page 94 for details on configuring
the SMTP server.
Note: Only valid for Meridian and Avaya users.
VMWI Email Voice Message Waiting Indicator (VMWI)
Enabling this feature will trigger an email to be sent to you every time a voice mail has
been left in your corporate mailbox.
Call Log Email Enabling this feature will trigger an email to be sent to you with the Caller ID
information. This is useful when you have lost access to your voice services. Please
consult your PBX documentation to configure Caller ID.
Email Address Enter the email address of the ConneX user. Note, that invalid characters may be
entered in this field such as the $ symbol. Ensure you have entered the correct
address. To edit an address simply use your backspace, delete, right arrow, or left
arrow keys to scroll and insert characters. Press Enter to accept the address.
Security
Min Password Sets the minimum amount of characters to be used for the port (user) password. User
Length will not be able to choose passwords with fewer characters then this value. The
minimum value for this field is 3.
Idle Timeout This is the amount of time a channel will be in the Idle mode (connected but no active
calls) before the mobile phone is disconnected. Set this value to zero to disable the
Idle Timeout.
PBXgateway II System Administrator's Guide 112