Priority (Log); Priority (Syslog) - MCK EXTender PBXgateway II System Administrator Manual

Parameter Location:
Priority
Configuration->Log
(Log)
Description: Selects log message priority
Important
Usage: Used to determine which messages are logged. The log message
priority is used to customize the level of troubleshooting desired.
This info
applies to:
Log messages include:
•
Sys,
Fatal: Unit is not functioning
Mgmt,
•
Error: Failure
NET and
•
Warning: Problem with unit, still operational
Port priority
•
Info: EXTender session, someone connected
parameters
as well.
•
Debug: Detailed message (for troubleshooting)
•
Trace: Packet type tracing
Example: If the (Log) Priority was set to "Info", then the only log messages that
would NOT be saved are messages related to "Debug" and "Trace".
Parameter Location:
Priority
Configuration->IP->Syslog
(Syslog)
Description: Selects log message priority to Syslog host.
Usage: Used to determine which messages are logged. The Syslog message
priority is used to customize the level of troubleshooting desired.
Log messages include:
•
Fatal: Unit is not functioning
•
Error: Failure
•
Warning: Problem with unit, still operational
•
Info: EXTender session, someone connected
•
Debug: Detailed message (for troubleshooting)
•
Trace: Packet type tracing
Example: If the (Syslog) Priority was set to "Info", then the only log messages
that would NOT be saved are messages related to "Debug" and "Trace".
PBXgateway II System Administrator's Guide 132