Size (Log); Set Password (Admin); Subnet Mask - MCK EXTender PBXgateway II System Administrator Manual

Parameter Location:

Size (Log)

Configuration->Log
Description: The size of the log message in bytes.
Note: After the log is full, the log messages are written over each other, starting
from the first message.
Usage: Limits the size of Log messages.
Example: [131000]
Parameter Location:
Set
Utilities->System
Password
(Admin)
Description: This parameter sets the admin password for the PBXgateway II.
This is NOT the Connect Password.
Usage: The admin password will restrict access to the Management Interface
(MI).
Example: doc345
See Also: Chapter 4 Setting the Administrator's Password
Parameter Location:
Subnet
Configuration->IP->LAN (or AUX_LAN)
Mask
->Address
Description: Enter the Subnet Mask IP Address.
Usage: A Subnet Mask identifies the network number (class) and the range of
valid machine addresses on the network.
Example: 255.255.255.0
Dependencies: Must be assigned by the network administrator.
See Also: Chapter 4 IP Address Parameters
PBXgateway II System Administrator's Guide 134