Table of Contents
Advertisement
Definity - Installing the Remote Module
Pre-Installation Checklist
Ensure your EXTender Plus Remote Kit includes the following items:
•
One EXTender Remote Module
•
One EXTender 3000 Office Module Quick Installation Guide
•
12 volt DC unregulated supplied by standard 120 volt adapter (U interface) or a 12 volt DC unregu-
lated, supplied by 220/240v adapters (S/T interface)
•
One ISDN line cord (RJ45 cable)
Ensure your digital telephone is located within 400 feet (120 meters) of the EXTender Remote Module.
CAUTION: Do not connect a digital telephone to an Office Module.
Installation Procedure
All connections to the Remote Module are done via the back panel.
RJ11 Digital Line
Digital Phone
Telephone
1.
Connect the ISDN jack on the Remote Module to your ISDN jack using the RJ45 cable that comes with
the kit.
2.
Connect the digital telephone to the PHONE jack of the Remote Module.
3.
If you are using Ethernet data, connect the Ethernet jack on the Remote Module to your local LAN or
PC. Refer to the Data Configuration section of the System Administrator's Guide to set the Ethernet
data type operation.
Page 10
Analog
Phone
Ethernet
RS-232
Port
RJ45 Cable
Serial Cable RJ45 Cable
Ethernet
Jack
Figure 2: Definity Remote Module Back Panel
ISDN +12VDC
AC Adapter
Electrical
Outlet
ISDN Jack
EXTender 3000 Quick Installation Guide
Definity - Installing the Remote Module
Advertisement
Table of Contents
