MCK EXTender PBXgateway II System Administrator Manual page 42

Table 2: PBXgateway II Component Description
Component
WAN Ports (2) RS-232/V.35/RS-530, DB25 male
connectors. Provide a serial connection to
the Network Device.
Telephony RJ-21, 50-pin male connector. Connects
Interface the unit to the PBX.
Network Not currently used
Interface
AUX LAN Port RJ-45 connector. Connects the
PBXgateway II to the LAN for Telnet,
HTML management interface access, or
Voice over IP traffic.
LAN Port RJ-45 connector. Connects the
PBXgateway II to the LAN for Telnet,
HTML management interface access, or
Voice over IP traffic.
System Status Four, tri-color LEDs. Displays the
LEDs PBXgateway II system status.
LAN Status 2 LEDs per Ethernet port. The LEDs
LEDs display the status of the Ethernet
connection
Port Status Twenty-four LEDs display the status of
LEDs the phone ports.
Expansion Port PMC
Management RS-232, DB9 serial connector. Provides
Console Port the following:
Dial-up RS-232, DB9 serial connector. Provides
Management Dial-up access to the management
Console Port console via an external modem
PBXgateway II System Administrator's Guide
Description
A direct serial connection to a local
PC for management console access.
Label Placement
Label placed above each port.
Label placed above the
connector.
N/A
Label placed above the
connector.
Label placed above the LEDs.
The LEDs are built into the port.
Label placed above the LEDs.
Allows you to add expansion
network interface cards.
WAN cards such as those
supporting T1, PRI, SDSL,
ADSL, Ethernet, or other
protocols can be added as they
are available.
Label placed above the
connector.
Label placed above the
connector.
42