MCK EXTender PBXgateway II System Administrator Manual page 181

Table 25: extSnmpControlGroup
Group Name:
extSnmpControlGroup
extSnmpEnabled
extTrapPriority
extTrapHost1
extTrapHost2
extTrapHost3
extTrapHost4
extTrapHost5
extTrapHost6
extTrapHost7
extTrapHost8
extTrapPath
Table 26: extTopologyGroup
Group Name:
extTopologyGroup
extTopType
extTopDevice1
extTopDevice2
extTopDevice3
extTopDevice4
extTopDevice5
extTopDevice6
extTopDevice7
extTopDevice8
Table 27: ExtSuspend Table
Group Name:
extSuspendTable
extSuspendEnabled
extSuspendRvpMethod
extSuspendIpDestination
extSuspendRemLoginTimeout
extSuspendTimeout
extSuspendMode
extSuspendACDTone
PBXgateway II System Administrator's Guide
Description
Indicates SNMP is enabled.
Indicates the Priority setting for SNMP traps to be sent.
The IP address or HOST name to send first trap message.
The IP address or HOST name to send second trap
message.
The IP address or HOST name to send third trap message.
The IP address or HOST name to send fourth trap
message.
The IP address or HOST name to send fifth trap message.
The IP address or HOST name to send sixth trap message.
The IP address or HOST name to send seventh trap
message.
The IP address or HOST name to send twelfth trap
message.
Path where traps are sent: WAN, LAN, BOTH
Description
The device type of the main unit: Gateway, Remote
Device type connected to Port 1.
Device type connected to Port 2.
Device type connected to Port 3.
Device type connected to Port 4.
Device type connected to Port 5.
Device type connected to Port 6.
Device type connected to Port 7.
Device type connected to Port 8.
Description
Indicates if Call Suspend is Enabled.
The IP address or HOST name to connect to, from Call
Suspend.
Call Suspend timeout value.
Call Suspend mode used: Ring, Lamp
Indicates if ACD Tone is enabled for individual Port
(Remote only).
181