Table of Contents
Advertisement
Utilities
Setting the Date
The Real Time Clock (RTC) provides an accurate date/time stamp for log messages and statistics used in
the Management Interface (MI). The time is displayed using a 24 hour clock.
Example:
Date: December 10, 1999
Time: 15:46:37 (no a.m. or p.m.- 24 hour clock)
Procedure
1. Access the Set Date menu from the Main Menu using the following path:
Path:
->Utilities->System->Set Date
The Set Date menu has the following parameters:
•
Month
•
Day of month
•
Year
•
Hour
•
Minute
•
Second
•
Daylight Savings
2. Press the ↓ key to access each parameter and fill in the appropriate information as required.
→
Note: Press the
key to scroll through the choices for Month.
3. Press the ← key to accept changes and go back to the System menu.
Note: The PBXgateway II and EXTender 6000 preserve their date and time even when power is lost. The
EXTender 4000 will lose its date and time after loss of power but will retain it once it connects to a
PBXgateway II.
PBXgateway II System Administrator's Guide
97
Advertisement
Table of Contents
