Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 896

3. The existing temperature sensor will not be used so remove it from the sensor holder, and
once more install the empty sensor holder (without sensor) in the control box.
CAUTION
Make sure to install the sensor holder inside the control box, as it is a fire hazard. Otherwise,
it may cause fire.
Cassette type
Sensor
4. Insert the connector of the sensor attached to the Fresh air intake kit onto the substrate board
of the indoor unit.
Cassette type
CN8 : White
5. Insert the included extension cable for use with louver to the connector.
6. When using the optical receiver unit (option), insert the included extension wire to the indoor
unit.
7. Close the control box cover when work is complete.
Installation procedure:
1. After provisional fixing of a cassette grille, feed the louver extension wire (and optical receiver
extension wire) through the penetrating hole.
2. Connect to the connection wires coming out of the cassette grille.
7-4. Fresh air intake kit for cassette type
Circular flow cassette type
Holder
Circular flow cassette type
- (10-44) -
Control box cover
Sensor
CN8: White
7. Optional parts installation