Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 665

LED105
Setting mode
code no.
Outdoor
temperature
3 6
zone boundary
temperature A
Outdoor
temperature
3 7
zone boundary
temperature B
Capacity
priority setting
4 0
(in low noise
mode)
Low noise
4 1
mode setting
Low noise
4 2 mode operation
level setting
6 0 Prohibited
Electricity
meter no.
7 0
setting 1 *
Electricity
meter no.
7 1
setting 2 *
2-1. Setting on outdoor unit PCB
LED104
Setting function
code no.
0 0 -4.0 °F (-20 °C)
0 1 -0.4 °F (-18 °C)
0 2 3.2 °F (-16 °C)
0 3 6.8 °F (-14 °C)
0 4 10.4 °F (-12 °C)
0 5 14.0 °F (-10 °C)
0 6 17.6 °F (-8 °C)
0 7 21.2 °F (-6 °C)
0 8 24.8 °F (-4 °C)
0 0 42.8 °F (6 °C)
0 1 14.0 °F (-10 °C)
0 2 17.6 °F (-8 °C)
0 3 21.2 °F (-6 °C)
0 4 24.8 °F (-4 °C)
0 5 28.4 °F (-2 °C)
0 6 32.0 °F (-0 °C)
0 7 35.6 °F (2 °C)
0 8 39.2 °F (4 °C)
0 9 42.8 °F (6 °C)
1 0 46.4 °F (8 °C)
1 1 50.0 °F (10 °C)
1 2 53.6 °F (12 °C)
1 3 57.2 °F (14 °C)
1 4 60.8 °F (16 °C)
1 5 64.4 °F (18 °C)
0 0 Off (Quiet priority)
0 1 On (Capacity priority)
0 0 Off (Normal)
0 1 On (Low noise mode)
0 0
0 1
0 0 Prohibited
0 1 Prohibited
0 0 Setting number x00
0 1 Setting number x01
• •
• •
1
• •
9 8 Setting number x98
9 9 Setting number x99
0 0 Setting number 0xx
0 1 Setting number 1xx
1
0 2 Setting number 2xx
Factory
setting
♦
♦
♦
♦
Level 1 ♦
Level 2
♦
♦
•
•
•
♦
- (07-65) -
Remarks
Setting if changing the outdoor
temperature setting for heat pump
prohibition zone is required when
heater selection control using
outdoor temperature 1 and 2 are
performed on indoor unit.
For details, refer to "External
output" in Chapter 8. EXTERNAL
INPUT AND OUTPUT on page 08-
5.
Setting if changing the outdoor
temperature setting for heat pump
only zone is required when heater
selection control using outdoor
temperature 1 is performed on
indoor unit.
For details, refer to "External
output" in Chapter 8. EXTERNAL
INPUT AND OUTPUT on page 08-
5.
If the cooling/heating performance
becomes insufficient when the low
noise mode is set, it is possible to
set "Capacity priority" that
automatically cancels the low
noise mode. (Once performance is
restored, the mode will
automatically return to the low
noise mode.)
Level 1: The operating sound
lowers from about 3 to 5 dB (A)
more than the rated value.
Level 2: The operating sound
lowers from about 3 to 5 dB (A)
more than the Level 1.
Setting prohibited
Set the ones digit and tens digit of
the number of the electricity meter
connected to CN135.
Set the hundreds digit of the
number of the electricity meter
connected to CN135.
2. Function settings