Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 463

Item
On/Off Status*
Operation mode setting status
Temperature setting status
Airflow mode setting status
Set point temperature limit status
Thermostat off setting status*
Centrally control (Filter reset) status
Centrally control (All mode) status
Centrally control (Timer mode) status
Indoor unit
monitoring Centrally control (Set temperature)
(Individual) status
Centrally control (On/Off) status
Centrally control (On) status
Centrally control (Operation) status
Anti-freeze setting status
Energy save mode setting status
Filter sign reset status
Room temperature status
Error code status
Operation mode restriction status
Indoor unit Maintenance mode status
monitoring
Emergency stop setting status
(Batch)
Outdoor unit
monitoring Error code Status
(Individual)
Convertor unit
monitoring Error code Status
(Individual)
NOTES:
• For detailed information, refer to the interface specification posted on "Service & Supports" page
of the web site.
https://www.fujitsu-general.com/global/support/
• *1: To protect the compressor of the outdoor unit, carefully read and understand the following
caution that may affect the operation of compressor before executing the setting.
CAUTION
When performing periodical settings like schedule settings for the following functions, perform
the setting to all indoor units in the same refrigerant system simultaneously, conforming to the
timing restriction described below.
<Corresponding function>
• Start operation
• Release indoor unit forced thermostat off mode
• *2: Forced thermostat off instruction
– Only one equipment can send these instructions for each refrigerant system.
– When these instructions are sent by multiple equipment, the system may not respond as in-
structed or may cause malfunction.
• *3: All operation setting, Timer setting, Room temperature setting, Operation mode setting,
On/Off Operation, Filter reset operation, On operation setting
3-3. Network convertor for LonWorks (UTY-VLGX)
Function
1
1 2
*
More than 10 minutes
must elapse
More than 10 minutes
must elapse
- (05-125) -
Description
The indoor unit which is now operating can be
monitored in all indoor units
Cooling/Heating/Auto/Fan/Dry mode status
Room set temperature status
Airflow mode status
Room set temperature limit status
Thermostat off set value status
Remote controller filter reset prohibition status
Remote controller all mode prohibition status
Remote controller timer mode prohibition status
Remote controller set temp. prohibition status
Remote controller On/Off prohibition status
Remote controller On prohibition status
Remote controller operation prohibition status
Anti-freeze set status
Energy save mode set status
Filter sign reset status
Room temperature status
Error code status can be monitored.
3
Restriction item* can be monitored.
Maintenance status
Emergency stop setting status
Error code status
Error code status
• Stop operation
• Set indoor unit forced thermostat off mode
3. Adaptor/Convertor units