System Settings - Fujitsu AIRSTAGE J-IIIL Design & Technical Manual

1. System settings

Set each switch to the corresponding system type as described in the accompanying explanation,
and do not use a nonexistent switch combination.
CAUTION
• Perform the system type setting and address setting, before turning on the power.
• For proper operation of the air conditioner, perform the setting as described in the instruction.
RELATED LINKS
"System type setting"
"Address setting" on page 07-3
"Manual address setting method"
"Address setting by remote controller"
"Automatic address setting"
"Terminal resistor setting"
"Indoor unit connection check"
on page 07-2
on page 07-8
on page 07-15
on page 07-49
on page 07-56
on page 07-57
- (07-1) -
1. System settings