Function Settings - Fujitsu AIRSTAGE J-IIIL Design & Technical Manual

2. Function settings

To adjust the functions of this product according to the installation environment, various types of
function settings are available.
NOTE: Incorrect settings can cause a product malfunction.
RELATED LINKS
"Setting on outdoor unit PCB"
"Setting on indoor unit PCB"
"Setting by service tool (UTY-ASGXZ1)"
"Indoor unit (setting by wireless remote controller)"
"Indoor unit (setting by UTY-RNKU)"
"Indoor unit (setting by UTY-RSRY, UTY-RHRY)"
"Indoor unit (setting by UTY-RSKU, UTY-RHKU)"
"Indoor unit (setting by UTY-RNRUZ)"
"Function details" on page 07-96
"Wired remote controller (UTY-RNKU)"
"Simple remote controller (UTY-RSKU, UTY-RHKU)"
"Touch panel controller"
"Central remote controller (UTY-DCGY)"
"Central remote controller (UTY-DCGYZ1)"
"Wired remote controller (Touch panel)"
"Simple remote controller (UTY-RSRY, UTY-RHRY)"
"Network convertor (UTY-VTGX)"
"Network convertor (UTY-VGGXZ1)"
"Signal amplifier" on page 07-119
"Modbus convertor for VRF"
"Network convertor for LonWorks"
"Thermostat convertor"
"Duct static pressure setting"
"Administrative indoor unit setting"
"Energy saving setting on System controller"
"Electricity charge apportionment setting (System controller, Touch panel controller)"
on page 07-60
on page 07-67
on page 07-74
on page 07-84
on page 07-93
on page 07-101
on page 07-105
on page 07-106
on page 07-107
on page 07-109
on page 07-115
on page 07-117
on page 07-121
on page 07-124
on page 07-125
on page 07-128
on page 07-129
on page 07-131
- (07-59) -
on page 07-78
on page 07-87
on page 07-90
on page 07-103
on page 07-113
on page 07-137
2. Function settings