Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 712

4. When the "Yes" on the verification screen of indoor unit verification is touched, all indoor units
will stop, and the verification mode starts.
5. When indoor unit position verification ends, a screen displaying the indoor units in a list is dis-
played. When the screen has multiple pages, they can be switched by touching the "Next Page"
or "Previous Page".
When the indoor unit address to be verified is touched, the appropriate indoor unit performs the
air blow and the LED lamps blink*. (*Only when the indoor unit has that function.)
6. When the "End" is touched, the display returns to the I.U. Address Verification screen men-
tioned in step 2.
When "Back" on the I.U. Address Verification screen is touched, the display returns to the Main-
tenance screen.
2-15. Wired remote controller (Touch panel)
I.U. Address Verification
Indoor unit position will be checked. OK?
No Yes
I.U. Address Verification I.U. Address Verification
Page 1/ 2 Page 1/ 2
No. System–Unit No. System–Unit / Ref.–In. Ref.–In.
1 002–1 / 01–01
2 002–2 / 01–02
3 002–3 / 01–03
Next Next
End End
Page Page
I.U. Address Verification
Page 1/ 2
No. System–Unit / Ref.–In.
1 002–1 / 01–01
2 002–2 / 01–02
3 002–3 / 01–03
Next
End
Page
I.U. Address Verification
Page 1/ 2
No. System–Unit / Ref.–In.
1 002–1 / 01–01
2 002–2 / 01–02
3 002–3 / 01–03
Next
End
Page
I.U. Address Verification
Page 1/ 2
No. System–Unit / Ref.–In.
1 002–1 / 01–01
2 002–2 / 01–02
3 002–3 / 01–03
4 002–4 / 01–04
5 002–5 / 01–05
6 002–6 / 01–06
Next
Back Check
Page
- (07-112) -
2. Function settings