Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 624

 Reconfirmation of address setting
Press and hold the MANUAL AUTO button for 3 seconds.
• Indoor unit address setting
1. Make sure that the function number is set to "01" with referring the step 2. in
dress setting"
2. Press the TIMER set (-) button. Associating indication will be shown on the indoor unit LED
lamps.
TIMER set (-)
• Refrigerant circuit address setting
1. Make sure that the function number is set to "01" with referring the step 2. in
circuit address setting"
2. Press the TIMER set (-) button. Associating indication will be shown on the indoor unit LED
lamps.
TIMER set (-)
1-4. Address setting by remote controller
MANUAL AUTO
IR receiver unit
on page 07-19.
on page 07-21.
- (07-24) -
3 short beeps
MANUAL
AUTO
Example) ADDRESS: 34
OPERATION lamp
(Green)
0.5 sec ON / 0.5 sec OFF
TIMER lamp
(Orange)
3 times
0.5sec ON / 0.5sec OFF
FILTER lamp
(Red)
4 times
Example) ADDRESS: 25
OPERATION lamp
(Green)
0.5sec ON / 0.5sec OFF
TIMER lamp
(Orange)
2 times
0.5sec ON / 0.5sec OFF
FILTER lamp
(Red)
5 times
"Indoor unit ad-
1 to 10 sec
1 to 10 sec
"Refrigerant
1sec ON / 1sec OFF
1 - 10 sec
1 - 10 sec
1. System settings