4-2. Central remote controller (UTY-DCGY)
External input and output functions and related components are as follows:
External input
Control input
—
—
RELATED LINKS
"External input"
on page 08-63
"External output"
on page 08-67
"Optional parts"
on page 08-68
"Function summary of controller external input/output"
¢ External input
This function performs "Emergency stop" or "All On / All Off" by using the signal to be input externally
at external input terminals.
Input select
Use either one of Apply voltage terminal or Dry contact terminal according to the application. (Both
types of terminals cannot be used simultaneously.)
• CN6 and CN7: Dry contact terminal
When a power supply is unnecessary at the input device you want to connect, use the Dry contact
terminal CN6 and CN7.
*:
Short circuit detection resistance (R
Open circuit detection resistance (R
A twisted pair cable 22 AWG (0.33 mm
4-2. Central remote controller (UTY-DCGY)
External output
—
Operation status
Error status
*
Connected unit
2
) should be used. (Maximum cable length: 82 ft [25 m])
Input select
Connector
Dry contact
CN6, CN7
Apply voltage
CN11, CN12
—
on page 08-75
PCB
): ≤ 500 Ω
ON
): ≥ 100 kΩ
OFF
- (08-63) -
External connect kit
(Optional parts)
UTY-XWZXZ7
UTY-XWZXZ8
CN9
UTY-XWZXZA
CN7
(Green)
CN6
(White)
4. Controller