Controller; Touch Panel Controller - Fujitsu AIRSTAGE J-IIIL Design & Technical Manual

4. Controller

RELATED LINKS

"Touch panel controller"

"Central remote controller (UTY-DCGY)"
"Function summary of controller external input/output"
4-1. Touch panel controller
External input and output functions and related components are as follows:
External input
Control input
Electricity meter
—
—
RELATED LINKS
"External input" on page 08-57
"External output" on page 08-62
"Optional parts" on page 08-62
"Function summary of controller external input/output"
¢ External input
This function performs "Emergency stop" or "All On / All Off" by using the signal to be input externally
at external input terminals.
 Input select
Use either one of Apply voltage terminal of Dry contact terminal according to the application. (Both
types of terminals cannot be used simultaneously.) For more details, refer to the operation manual of
Touch panel controller.
It is possible to switch to the Dry contact terminal or the Apply voltage terminal by connecting CN201
of TM201 on the PCB to CN411 or CN412 on the PCB of the panel side.
* The Dry contact terminal (connected to the CN411) is set at the time of factory shipment.
TM201 - K1, K2
Dry contact terminal
Apply voltage terminal
4-1. Touch panel controller
on page 08-57
on page 08-63
External output
—
—
Operation status
Error status
- (08-57) -
on page 08-75
Connector
TM201
(CN411 or CN412)
CN410
on page 08-75
Connect with the CN201
CN411
CN412
External connect kit
(Optional parts)
—
—
UTY-XWZXZA
4. Controller