Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 708

4. Tap the address list "00" to "15".
NOTES:
• Address No. can be set between "00" and "15". (Up to 16 of this controller can be installed
in 1 system.)
• When installing 2 or more controllers, set up so that Address No. does not overlap.
• When installing multiple controllers in the same VRF network system, avoid to overlap the
Address No. of following controllers. (Even the same type of controllers, the Address No. is
not allowed to overlap.)
– Touch panel controller, Central remote controller
– Modbus convertor
– Network convertor for LONWORKS, Network convertor for Group remote controller
• For details, refer to the operating manual of the controller.
2-14. Central remote controller (UTY-DCGYZ1)
- (07-108) -
2. Function settings